An opened furnace front panel showing the burner assembly, igniter and flame sensor lit by a flashlight beam in a tidy basement

Services · Heating Repair

Heating Repair in Nashville

When the heat stops, we diagnose the real problem, explain it plainly and fix it right so you can get warm again.

Call us today615-357-7797
  • Best forHeat that is failing
  • ChecksIgnition, airflow, safety, controls
  • Common fixesIgnitors, sensors, blowers, boards
  • SafetyGas and venting checked
  • ResultHeat tested before we leave
  • AdviceRepair or replace, explained

About Heating Repair

A cold house is no fun. We find the problem and get the heat back

A heating system can fail in many ways: no heat at all, a furnace that starts and stops, weak airflow, strange noises or smells, or heat that never reaches certain rooms. We check the whole system rather than swapping parts and hoping.

Common culprits include ignitors, flame sensors, blower motors, thermostats, filters and control boards. We show you what we find, explain your options and recommend replacement only when repair no longer makes sense.

Call 615-357-7797

  • A full system check, not a guess at one part
  • Clear explanation before any work begins
  • Safety checks on combustion systems
  • Honest advice on repair versus replacement
A red brick Nashville home at dusk with a light dusting of snow on the roof and lawn, warm glowing windows and a thin wisp of vapor from a white vent pipe near the foundation

Signs to Watch For

When to Call Us

If you notice any of these, a check sooner is usually cheaper and safer than waiting.

  • No heat at all
  • Furnace starts and stops
  • Strange noises or smells
  • Uneven heat room to room

Safety first. If you smell gas, hear a carbon monoxide alarm, see smoke or sparks or smell burning, leave the area and call your gas utility or emergency services. For help with your heating and cooling, call us at 615-357-7797.

Who It Is For

A Great Fit If You…

Homes with no heat or weak heat

Furnaces that short cycle or make noise

Anyone with a rising winter gas or power bill

How It Works

What Goes Into Heating Repair

Four parts of the job, each explained so you know what to expect.

An opened furnace front panel showing the burner assembly, igniter and flame sensor lit by a flashlight beam in a tidy basement

No flame, no heat

Ignition Problems

Hot surface ignitors and flame sensors are among the most common furnace failures. We test and replace what has failed.

  • Ignitor
  • Flame sensor
  • Gas valve
  • Control board
  • Heating Power
  • Efficiency
  • Safety
  • Reliability
  • Value
A close-up of a furnace control board and wiring harness with a digital multimeter resting on the cabinet top and test leads clipped on, bright work light

Move the heat

Airflow and Blowers

A dirty filter, failing blower motor or blocked return can overheat a furnace and shut it down for safety.

  • Filter
  • Blower
  • Limit switch
  • Returns
  • Heating Power
  • Efficiency
  • Safety
  • Reliability
  • Value
Frost forming on a window pane seen from inside a dim room at night with a snowy yard and a streetlight outside, a cold blue tone and a faint warm lamp glow in the corner

Sometimes it is the brain

Thermostats and Controls

A failed thermostat, loose wire or bad control board can mimic a bigger problem. We test the controls first.

  • Thermostat
  • Wiring
  • Board
  • Sensors
  • Heating Power
  • Efficiency
  • Safety
  • Reliability
  • Value
A tidy furnace utility closet with a fresh pleated filter slid into place and the blower compartment door clean and closed, soft overhead light

Do not skip this

Safety Checks

We check the heat exchanger, venting and combustion for safety and tell you plainly if anything needs attention.

  • Heat exchanger
  • Venting
  • CO test
  • Gas leak
  • Heating Power
  • Efficiency
  • Safety
  • Reliability
  • Value

How It Scores

Where Heating Repair Shines

Each shape shows how one part of this service performs on five qualities. Tap a name to compare. Scores are our plain-English judgement, not lab ratings.

Ignition ProblemsAirflow and BlowersThermostats and ControlsSafety ChecksHeating PowerEfficiencySafetyReliabilityValue

The Process

How We Work With You

01

Call or Book Online

Call 615-357-7797 or send the form and tell us what is happening. We schedule a visit and tell you what to expect.

02

Diagnose Honestly

We check the whole system, find the real cause and explain it in plain English before any work begins.

03

Fix It Right

We repair what needs repairing with quality parts, and we tell you if a bigger issue is on the horizon.

04

Test and Explain

We run the system, confirm it is cooling or heating properly and walk you through what we did.

Free Tool

Comfort Troubleshooter

Pick a symptom and get safe checks to try, likely causes and when to call a professional.

Open the Tool

Before and After

See the Difference

Drag the handle to compare. Photos are illustrative.

Before: An old yellowed gas furnace with dusty panels, rusty ductwork and tangled wiring in a basement
After: The same basement spot with a brand-new high-efficiency furnace, new white PVC vent pipes, tidy sheet-metal and neat wiring under bright lighting
BeforeAfter
Old Furnace to a New High-Efficiency FurnaceA yellowed, dusty furnace with rusty ductwork gave way to a new high-efficiency furnace with new PVC venting and tidy sheet metal.

Photos on this site are illustrative and show typical equipment and homes, not completed Music City HVAC projects. Every system is sized and confirmed with a visit before work begins, and permit and code requirements depend on your home and location. Figures in our tools are planning estimates only.

Good to Know

Questions About Heating Repair

Still have a question?

Call 615-357-7797

My furnace runs but there is no heat. What could be wrong?

Possible causes include a failed ignitor, a dirty flame sensor, a tripped limit switch or a gas supply issue. A proper diagnosis finds which.

Should I repair or replace my furnace?

Age, repair cost, efficiency and safety all matter. Use our Repair or Replace Advisor, and we will give you an honest view.

Is it safe to keep running a furnace that makes noise?

It depends on the noise. Banging, burning smells or flame irregularities mean you should turn it off and call us.

Free Estimate

Let’s Get Your Comfort Sorted

Request your free estimate. Tell us what is going on and what system you have and we will get back to you quickly. Or call 615-357-7797.

Call us today615-357-7797

Get Your Free Estimate

Music City HVAC repairs, installs and maintains heating, cooling and air quality systems for homes and businesses across Nashville and Middle Tennessee.

Call us today615-357-7797
  • Serving 21 Middle Tennessee cities

Follow Us

Copyright © 2026 – Music City HVAC | Nashville TN | All Rights Reserved | Heating | Air Conditioning | Air Quality | Duct Services | Middle Tennessee | Website By: Top Search SEO